Where is Mariner Way?
Mariner Way, located on the Riverside View Development is one of Lancaster’s most fashionable and highly sought-after addresses. Set just moments away from the picturesque River Lune, one could easily forget that they are just a 15-minute stroll from the heart of the historic city centre of Lancaster.
Situated along the wonderful St. George's Quay, close to some great bars and restaurants and the city centre itself. It has great commuter links, being just one mile from Lancaster railway station and within a few miles of the M6.
The Overview
This three-bedroom detached house has been designed with comfort and practicality in mind. The ground floor is open plan with its stylish kitchen featuring quartz counters and integrated appliances and ample floor space for sitting and dining areas. All are enhanced by the ground floor W.C., utility cupboard, and built-in storage cupboards.
The master bedroom features built-in wardrobes and an en-suite shower room. Bedrooms two & three are a double and a single. A three-piece bathroom rounds off the upstairs.
To the rear, we find the updated backyard, with its Indian paving and pergola sitting area creating a modern space to relax in. It also benefits from a detached garage and driveway that can accommodate three cars.
Key Information
- Designed to be energy efficient, EPC rating: B
- Smeg oven and Hob, along with Quartz countertops
- Integrated appliances & utility cupboard
- Built in 2017 by Redrow Homes and has been extremely well taken care of
- Master bedroom features high-quality fitted wardrobes
- The freehold has been bought for this property
- Indian Paved rear yard
Mariner Way, LA1
Valid until 12.02.2028
Property Type: | House | Build Form: | Detached |
Transaction Type: | New dwelling | Energy Tariff: | Standard tariff |
Main Fuel: | Mains gas - this is for backwards compatibility only and should not be used | Flat Top Storey: | No |
Top Storey: | 0 | Previous Extension: | 0 |
Open Fireplace: | 0 | Walls: | Average thermal transmittance 0.29 W/m-¦K |
Walls Energy: | Very Good | Roof: | Average thermal transmittance 0.14 W/m-¦K |
Roof Energy: | Very Good | Main Heating: | Boiler and radiators, mains gas |
Main Heating Controls: | Time and temperature zone control | Hot Water System: | From main system |
Hot Water Energy Efficiency: | Good | Lighting: | Low energy lighting in all fixed outlets |
Floors: | Average thermal transmittance 0.21 W/m-¦K | Total Floor Area: | 110 m2 |
Contains public sector information licensed under the Open Government License v3.0
The information contained within this report is for general information purposes only and to act as a guide.
Sprift Technologies Ltd aggregate this data from a wide variety of sources and while we endeavour to keep the information up to date and correct, we make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, of the information or related graphics contained within this report for any purpose. Any reliance you place on such information is therefore strictly at your own risk. In no event will we be liable for any loss or damage including without limitation, indirect or consequential loss or damage, or any loss or damage whatsoever arising from loss of data or profits arising out of, or in connection with, the use of this report.
Information produced by HM Land Registry. Crown copyright and database rights 2024
Council Tax pays for multiple services in the property's local authority with only part of it going to the council itself. Residences within a Parish or Town Council area have an additional charge to fund the body. Each parish/town council has a different budget and imposes different fees. Not all councils have parishes/town councils and this varies across the country.
In instances where parish/town councils do affect the council tax value and we do not have the exact figure, we present council tax data with the below highlights. Take care to confirm which is being presented by the dashboard as this will need to be made clear to your clients:
avg - When we indicate the Council Tax price is 'avg', it means we have not been able to obtain an exact figure, so this number represents the mean value of Council Tax across the council for that property band. The exact figure will be slightly higher or lower because each parish/town council is priced differently.
min - When we indicate the Council Tax is a 'min', it represents the known amount that the council sets for itself, but excludes the parish/town council cost which we have not been able to obtain. The additional cost will need to be considered as it will be greater than the indicated price.